If you have many WordPress blogs or niche websites and you need new content every day, I am sure at some point you searched WordPress auto spinner or similar terms in Google.
Many website owners don’t have time to publish new content regularly. Yes, writing content is a time-consuming job. Especially if you work alone and have many sites under your command.
Paying someone to write content for your sites may be a good decision. But you probably don’t have money to afford something like that. Article spinner tool or auto spinner plugin which can be used or even integrated into your WordPress site probably crossed your mind at least once.
I love writing on my sites. But I have few affiliate oriented sites for which there is just no time to write or say something that wasn’t already said.
In this situations, some tool to automatically rewrite content would come in handy. Who would not want to take some text found on the web, put it in automatic spinner or content rewriter and get the unique text for his site?
If you follow my posts, you know that I have already reviewed and checked tools for content rewriting. I have used and tested very known Spin Rewriter tool, popular WordPress Auto Spinner plugin and WordPress Content Spinner plugin which was a complete waste of time.
If I would had to choose from above mentioned three, then I would recommend going with Spin Rewriter. Good alternative to Spin Rewriter seems to be WordAi. It is highly praised and cited as one of the best tool for rewriting content.
I have purchased and tested WordAi for some time now, and I am ready to share my opinion. Is WordAi finally the tool I have been searching for or my journey continues?
WordAi is an automatic spinning tool that rewrites entire sentences and paragraphs so you can get new unique content. It supports English, Spanish, French, and Italian and is one of the most talked tools for rewriting content.
According to the official page, WordAi can tell the difference between words and make sure each and every synonym that it picks makes sense. Not only that it understands what each word means, but also how each word interacts with each other.
It looks for possible ways to rewrite your article based on what the article truly means. WordAi will often completely rewrite sentences, so they share nothing in common with the original sentence.
Before WordAi even starts spinning, it checks the entire article to understand what the content is about. This allows WordAi to create advanced paragraph and document level spins based on its incredible understanding of the content. This makes your content look human written.
When you log into your WordAi account (you can take advantage of the three days free trial), you will be introduced to what WordAi is and what it can do for you. This way you can test tool before committing to pay anything. Three days will be enough for you to judge if WordAi will be a worthy investment.
WordAi can also be integrated with many other tools using API. WordAi has three spinner styles: Standard, Turing and Foreign Language Spinner.
If you ever used content spinning software, you know the perks they usually come with. However, WordAi has a few features that most other article spinners don’t (at least according to its authors):
– WordAi knows that one word can have several meanings – One word in the English language can have several meanings depending on the context in which it is put in. WordAI recognizes that and produces far better content in the end as a result.
– WordAi automatically rewrites entire paragraphs and sentences – This functionality is offered by most content spinners, but not many are good at it.
WordAi tries to understand not just the words in the sentence, but the entire meaning of the phrase as well as its connection to subsequent sentences in the paragraph.
– WordAi understands not only the words, but the interaction between them.
– WordAi understands concepts and ideas – Before this tool even starts doing its thing, it will first read the entire text to understand it in both a general and a specific way.
That is what allows the software to create a much better sentence and paragraph spins, which in turn generates much more unique versions of the content for you to use.
– WordAi can write titles – by reading the content before spinning it, WordAi can also generate high-quality titles for it by knowing what the article actually means.
# WordAi Standard Spinner
When you hover over Spinner tab while login into your WordAi account, you will see three Spinner options. In Standard Spinner, you have a text input where you enter the content you want to spin and then a few spinning quality settings to choose from.
First spinning quality setting allows you to choose the quality of the content you want WordAi to produce. It has the following seven options: Extremely Unique, Very Unique, Unique, Regular, Readable, Very Readable and Extremely Readable option.
The second spinning quality setting allows you to choose whether or not you want WordAi to rewrite entire sentences for you automatically. This will create more unique versions of your content.
The third spinning quality setting allows you to choose whether or not you want WordAi to add automatically/remove/rearrange sentences. Just like the option above, this will give you, even more, unique versions of your content.
The fourth spinning quality setting allows you to choose whether or not you want WordAi to spin paragraphs for you automatically. Again, this will give you, even more, unique versions of your content.
The WordAi team suggests how to set spinning quality settings depending for what you need content:
1. Very readable content – If you need content which will be highly readable after spinning set the 1st input to “Very Readable” and enable both sentence rewriting and paragraph editing (2nd and 3rd input), but disable automatic paragraph spinning (the 4th input).
Keep in mind that this type of spinning will generate much less unique versions of your content as fewer synonyms will be used for the words.
2. Readable and unique content – Recommended settings for this type of content is setting 1st input to “Readable” and enabling sentence rewriting and paragraph editing (2nd and 3rd input) while disabling automatic paragraph spinning (the 4th input).
This will create unique versions of your content while still keeping a high level of readability. This should be the best setting as it gets a good balance between human readability and uniqueness of the content generated.
3. Tier 1 content – If you need content for tier 1 content (sites that link to your money site), WordAi team recommends setting the 1st input to “Regular”(I recommend using the “Readable” option). Also, activate the paragraph spinning (4th option) for this type of content.
4. Tier 2 content (content that is keyword rich and relevant to your niche. Doesn’t have to be all that readable, it just has to be indexable by a search engine.)– Here put same options as with the Tier 1 content situation with the only difference that you set the 1st input to “Regular.” It is important that lower tiers have a lower quality of content compared to upper tiers.
While these recommendations give you some general guidelines as to what settings you want to use in these more popular situations, don’t be afraid to test and customize according to your needs.
The more readable you set the 1st input field to be, the more tight WordAi will be when picking up synonyms for the words in your content. It will be more strict with the meaning of the text, and thus less unique versions will be produced but of more high quality and human readability.
If you are setting the 1st input more to the unique side of the options, WordAi will not care that much about the overall meaning of the content and try and use more and more synonyms for the words and phrases to create more and more unique versions in the result.
Now, after you have a basic understanding of the Standard Spinner option, I will rewrite some content to see the results. The below text I will use while testing WordAi various spinning options. I have on purpose picked text which has more technical terms to test WordAi properly.
With simple, easy to understand words it performs very well. But let’s see how it will spin below content.
The second part of the HealthPro Plus is unique gas and odor filter. This filter physically binds selective contaminant molecules and then chemically destroys them through an oxidation process.IQAir’s two-stage gas filtration provides excellent wide-range removal of chemicals and odors such as tobacco smoke and cooking odors. In the final filtration stage, air passes through HyperHEPA filter.A patented 3-D sealing mechanism called 3-D ultra-seal ensures that all air drawn in by the air cleaner actually passes through the HyperHEPA filter.This virtually eliminates the leakage that can cause a 50% drop in performance in other air cleaners. It filters allergens, viruses, and bacteria.
The second part of the HealthPro Plus is unique gas and odor filter. This filter physically binds selective contaminant molecules and then chemically destroys them through an oxidation process.
IQAir’s two-stage gas filtration provides excellent wide-range removal of chemicals and odors such as tobacco smoke and cooking odors. In the final filtration stage, air passes through HyperHEPA filter.
A patented 3-D sealing mechanism called 3-D ultra-seal ensures that all air drawn in by the air cleaner actually passes through the HyperHEPA filter.
This virtually eliminates the leakage that can cause a 50% drop in performance in other air cleaners. It filters allergens, viruses, and bacteria.
Standard Spinner With The “Very Readable” Setting
I will use the “Very Readable Content” settings suggested by WordAi to see the final result in comparison to the original text. Be noted, the text will be slightly different each time you spin original content.
Spinning process can take from 30 seconds to more than minute. It all depends on how long is your text and what setting you enabled. After putting text and choosing the spinning quality, you click “Spin Now.”
You will get spintax which you can manually change, one super unique spin and three spin content variations of original text. You can edit each spin or check it through Copyscape.
The content that WordAi generated in this example is calculated to have an average of 90% uniqueness. Here is an example spin (SUPER UNIQUE SPIN) generated from the spintax:
The spun content doesn’t look bad, but by my standards it is not good enough. Some sentences when reading don’t sound right. I wouldn’t use this text if I wanted to sound professional.
Enabling just Very Readable setting while disabling other settings, provided better human readable content but less unique. Standard Spinner With The “Readable” Setting
Now I will use “Readable” setting while gain keeping 2 and 3 quality setting enabled and only 4 disabled. This time, WordAi spin content was at 97% uniqueness.
As you can see spinned content for Readable setting is 95% same as Very Readable result from the example above. There are only couple different synonyms used and few words in various order.
Standard Spinner With The “Unique” Setting
Now to see what content WordAi will generate if I use the “Unique” setting. I have enabled second and third spinning quality setting. Uniqueness was 97% like with Readable setting.
Here you can see that WordAi is a lot more loose with the meaning of the text and uses synonyms wherever it can to produce the most unique content possible.
Again, the purpose of such content should be for the lower tiers where you would need a higher quantity of links with not that high-quality content.
Above content is way unusable than previous examples. Sentences mostly don’t have sense. I am afraid what kind of content is produced with Extremely Unique setting.
Standard Spinner With The “Extremely Readable,” “Regular,” “Very Unique” and “Extremely Unique” Setting
I will not put here results gain with for other types of readable setting but as expected Extremely Readable setting provided best results. The text was far better than other settings but provided far less unique content.
I wasn’t very happy with Regular results of spinning and found that Very Unique and Extremely Unique setting are practically terrible as they provide hardly readable content.
They do provide better content if you disable automatically rewrite sentences, automatically add/remove/rearrange sentences and automatically spin paragraphs setting. Manually Spinning Content With WordAi
Now, as I told you, it’s extremely hard for a machine to understand the content. There will always be something that doesn’t look like it should. Like a wrong synonym, incorrect punctuation, etc.
The good news is that when you spin content with WordAi, you can tweak the generated spintax.
When you spin content with WordAi, at the top of the results you will see the full spintax. Below spintax you will see a few spin versions generated from that spintax like a Super Unique Spin and three more different spins.
If for whatever reason you don’t like a particular part of the spun content, you can easily edit the source (spintax) to fix any mistakes. Just clicking on a word will bring out the window where you can quickly add or remove synonyms to be used.
You can do the same thing for any inappropriate words or phrases until the content looks like you want. But my opinion is if you manually need to edit spintax then what the point of spin rewriter is?
WordAi “Turing” Spinner
To open the “Turing” spinner, simply hover over the “Spinner” menu and then click on the “Turing Spinner” sub-menu which is below Standard Spinner.
The page you will get redirected to looks almost the same as the “Standard” 4spinner. You have the same four inputs below the content field plus an additional one which allows you to choose whether or not you want WordAi to generate a title for the content.
Also in Turing spinner under first input, you have only five spinning quality settings while in Standard you have seven. Those are Very Readable, Readable, Regular, Unique and Very Unique.
Turing Spinning With The “Very Readable” Setting
Following same rules like with Standard Spinner I used Very Readable Setting with having 2nd and 3rd setting enabled. It took more than a minute for WordAi to rewrite the text which is a more than what the “Standard” spinner took in any settings.
I believe that means a lot of stuff is happening on the back-end of the “Turing” spinner. But, let’s see what it managed to generate:
The above text is calculated by WordAi to be 87% unique which is still good and expected for the “Very Readable” setting. I like how WordAi removed an entire sentence from the content to mix it up. I like how it switched up the flow and even managed to spin a few words correctly.
The content is mostly similar to original content but still unique. Overall, if you look at the text, it is entirely human readable with barely anything that can tell that this content is generated by a content spinner.
Turring Spinning With The “Readable” Setting
This time WordAi calculated an average of 90% uniqueness. The spin version of what WordAi generated for Readable setting is the same as above text for Very Readable setting except it shuffle last three words in the first sentence. So no need to post a screenshot as it is same.
I am little disappointed that it didn’t produce more different content. But the text is very short, so I understand why there wasn’t much to do and change.
Turring Spinning With The “Unique” Setting
This time, I got 95% uniqueness score on spin and here is the result of it:
Looking at above rewritten content, I am very pleased with the outcome. Content generated is far better than with Standard Spinner unique setting. If I had added few technical words as protected words so that WordAi doesn’t try to change them, the text would be perfect.
In overall Turing Spinner is far better than Standard.
What’s The Difference Between WordAi Turing and WordAi Standard?
As you may have noticed there are two versions of this tool. “Standard” is an excellent spinner that can do everything any other application in this marketplace can do with little better performance.
The quality of the content it produces depends on the settings you set. Word spinning, paragraph spinning? The more aggressive you are, the more unique the content will be, but the readability will suffer.
“Turing” spinner of WordAi focuses on rewriting the structure and flow of the sentences of the content while still keeping their meaning. Not just swapping words for synonyms, but understanding the message you are trying to convey, and re-writing it as if it were a human author.
WordAi Turing enables the user to turn one great article into say 20 or 30 very good ones. Unique enough one by one to get indexed, readable and to easily be used on your direct/1st tier links.
WordAi “Foreign Language” Spinner
WordAi’s Foreign Language Spinner supports French, Italian, and Spanish. You simply enter your text and WordAi will automatically detect the language you are using, or you can select the language you want to have WordAi spin under spinning settings field.
Once you enter your content and hit “Spin Now” you will get back spintax. If you want to edit any of it, simply click on a word, and you will instantly see a list of all possible synonyms for that word.
Select/unselect to add/remove synonyms and type in your own. You can use the left/right arrow keys to move from one word to the next quickly.
Unlike Standard and Turing Spinner here you can only select if you want your content to be Regular or Readable and if you want to add/remove sentences (nested spintax) automatically.
Sadly, I don’t speak or know any of these languages, so I cannot actually perform any tests here.
How Would Spin Rewriter Spin Same Content? Spin Rewriter vs WordAi
I have used latest Spin Rewriter version 7 with recommended setting. Spin Rewriter has three spin readability settings. Those are generate as many suggestions as possible (high risk), use suggestions that you believe are correct (recommended) and only use suggestions that you’re really confident about (low risk).
I have enabled automatically protect Capitalized Words, didn’t add any protected words and disabled find synonyms for single words inside spun phrases as well (multi-level nested spinning).
Under ENL Semantic Spinning Features I have enabled: I want Spin Rewriter to rewrite complete sentences automatically and I want Spin Rewriter to rewrite entire paragraphs automatically.
I left disabled I want Spin Rewriter to write additional paragraphs on its own automatically and I want Spin Rewriter to automatically change the entire structure of phrases and sentences under ENL settings.
To see more about Spin Rewriter, all options, features, settings and spinning quality check my Spin Rewriter review.
The rewriting process was way faster than with WordAi.
I am very pleased with Spin Rewriter version too. Though it says 95% unique compared to original, I still see that most text is same as original. That is because I didn’t enable and set aggressive rewriting options.
Content is readable, and I like how it replaced cooking odors with food preparation odors. As I have both WordAi and Spin Rewriter, I have compared much content. Sometimes with the same content WordAi would perform better and sometimes Spin Rewriter.
This also depends on what features you enable. Also with each rewriting of same text, you will get different content so you can’t exactly compare which rewrite tool would be the best solution as your WordPress auto spinner tool.
Maybe Spin Rewriter because it has the option to connect with WordPress site so you can instantly publish your spun content. Spin Rewriter also has more features like fetching videos or images to add to the content. Or even grammar check which WordAi doesn’t have.
In my opinion, WordAi is simpler and has better user interface than Spin Rewriter. If I had to choose between those two, I would pick Spin Rewriter because of cheaper pricing plans and more features.
Which provides better spun content? I can’t say. As I already wrote, sometimes WordAi performs better and sometimes Spin Rewriter. I think you would not go wrong no matter which one you choose.
WordAi Custom Synonyms
From the “Account” menu, you will find the “Custom Synonyms” sub-menu. Custom Synonyms allows you to add your own synonyms for certain keywords and then force WordAi to use your synonyms when it comes to a word from your list.
WordAi Protected Words
Another thing you can do with WordAi is to add keywords that you don’t want the software to touch at all. For instance, if you don’t want WordAi to spin the word “Air purifier,” you can add it to your protected words list.
On this page, you will also find advanced settings that apply only to the “Turing” spinner which include the following options:
WordAi File Manager
From the “Account” menu, you will find the “File Manager” sub-menu which will take you to a page with all of your stored spintax files.
As you can see, there are files from before. If you click on the name itself, you will be taken to the spintax page where you can continue editing your content.
Besides that, there are four other actions you can perform on saved files: Delete, Download .ZIP With Spintax, Download .ZIP With Super Unique Spins or Download .ZIP With Random Spins.
WordAi Usage Info
Each month, you have a limit on the words you can spin with both of WordAi’s spinners. The limit is 2,500,000 for the “Standard” spinner and 250,000 for the “Turing” spinner.
If, for whatever reason you go over this limit, you will be charged extra at the following prices:
By default, WordAi allows your account to go over the default limits, and you will be charged for going over. You can easily change that on the “Usage Info” page by enabling Don’t allow me to go over my limit.
That way, if you reach your limits, WordAi won’t allow you to spin anymore, so you will not have to pay additional fees. However, they do offer custom plans for heavy API users. All you need to do is contact them.
WordAi Integration With Third Party Tools
Using WordAi API, you can integrate WordAi with many third party tools out of the box like WP Robot, Kontent Machine, WP RSS Aggregator, Ubot Studio, Licorne AIO, GSA Ser Ranker, Article Forge and many other tools.
You can also integrate it with your own tool or product following instructions on API info page. WordAi offers Regular and Turing API key.
WordAi offers two pricing plans. Monthly pricing plan costs $49.95 per month and yearly $347 per year. No matter which pricing plan you choose, you will get same features.
Here are advantages and disadvantages of using WordAi as article spinner for your WordPress website content:
There are a lot of spinners available on the market now. Some are good, some are OK and others are just junk.
Below I have compared 4 most popular spinners (SpinnerChief, TBS, SpinRewriter, and WordAi) based on features they provide for the price. I have not taken into account quality of their spinning content results.
For some insights into the quality of spun content from various content spinner tools see text comparison from inetsolutions.
The automatic spinning features of WordAi are great. But the tool does have its limitations when it comes to altering the spintax by hand.
As you saw, WordAi actually does generate decent content for software. I mean there’s a lot of room for improvement, but until computers get to a whole new level or until we learn how to gather the power of consciousness, I can’t see a machine getting an “A” in human language.
Content will generally maintain a good quality, but there are times when it looks spammy and needs manual editing. If WordAi “understands” content then the tool can produce some pretty impressive output.
Spinning already published an article and expecting it to be readable and unique is in most cases still a step too far currently. But it all depends on the content of your source.
One thing I’d like to be included that I have seen in different spinners is a suggestion of equivalent words while doing a manual release of the spintax.
It is incredibly easy and intuitive to use WordAi and is integrated to work with all of the top online marketing tools. My opinion is that WordAi is good with simple content which doesn’t have many technical terms. As soon as there are some tricky words, it will provide spinned content that is very unreadable.
I noticed that Turing Spinner performs slightly better and provides content of better quality than Standard Spinner, so I would recommend using it rather than Standard.
Comparing WordAi with Spin Rewriter I would say that they are on the same level when it comes to quality of provided spinned content. But if the price is your main focus then go for Spin Rewriter as it offers more affordable pricing plans and more features plus integration with WordPress.
I personally didn’t test Chimp Rewriter, Spinner Chief and The Best Spinner which are also rewriting tools often mentioned in comparisons and discussions so can’t tell you my experience from using them.
Now over to you my dear reader. Let me know in comments below if you have used any auto spinner tool for your WordPress website and your experience.
Content will generally maintain a high quality but there are times when it looks spun and the content needs manual editing. If WordAi “understands” it then the tool can produce some pretty impressive output.
Hello, my name is Matija but everybody calls me Kasa. I started this site to earn lots of money so that I never have to work again. Just lay down on a beach, drinking cocktails day after day while hot, beautiful chicks fight for my attention.Ok, now seriously. I love making websites, especially in WordPress. Hope reading content on this site you will find helpful tips, tutorials, comparisons, and product reviews for your business.
Hi, its an awesome post you have shared thanks for sharing great post
Thanks. If you have any questions feel free to ask.
Hi Kasa, its a very good review. So may I know which spinner do you recommend and which one you are using
I use Spin Rewriter. Just because it is cheaper option. But I found WordAi gives better readibility with spun content.
May I kindly know your opinion about spinnerchief, and if you compares between those three which one is better ?
Well SpinnerChief has more features and their pricing is affordable but I never tested SpinnerChief liked I did with Spin Rewriter and WordAi so don’t know about its spun quality much.
Products get updates and changes. You have to use it constantly to notice changes.
I tested Spinnerchief, and I believe that you need to find a good thesaurus or you can also take time to build your own thesaurus (which you can also sell on their Thesaurus directory market).
In fact, I tested to spun some good number of article in English with their “Cloud Thesaurus” and also with their “Miracle thesaurus).
Well, most of the time the results with Cloud thesaurus : average quality of spinning and not so unique. I tried all options and setting and honestly, I was decieved.
I also tried Spinnerchief in french : Just useless (unreadable at all).
So, the interface is however cool, compare to The best Spinner (which I don’t recommend).
I am actually also testing WordAI in Turing plan (3 days trial free) : The result is by far far away better than any other spinner tool available. I am completely honest and I believe that the price is justified. When you analyse deeply the spinning results, you can see the Artificial Intelligence power. Concerning the speed, I guess that it is because their server and programm need first to understand the whole meaning of the whole article, and also the specific meaning of each word to choose the true right synonym which will match better with your sentence and its deep meaning!
I personnaly want to buy it now. I think personnaly that If people want to build some good ranking sites or long term, WordAI is a must have.
All the other one could only be interresting for some manual spinning. But, Should not every entrepreneur look and invest in the best efficiency tool and target long term ? (this is another subject…)
Fnally, if you start with little budget, I advice you to look for curation technique. It is for me the best fairplay marketing technic, and combined with some good spinning strategy, it will lead you to succeed!
Thank you Nour for writing about your experience with spin rewriter tools.
For the love of GOD Dont buy WordAI unless you want to wait 30 minutes for a turin spin… Spinrewriter does it in 15 seconds.. Max what WordAi does in 15 minutes + (I’m not joking around here)
Yes, I also noticed that WordAi takes longer to spin text. It seems it is not isolated case.
Current ye@r *
Leave this field empty
Add me to your weekly newsletter!
Send this to friend